Key Features
- Analog output module: AQ 4xU/I with 4 analog outputs.
- Connection layout: 4xM12 interface design.
- Protection rating: Degree of protection IP67.
- Output ranges: Voltage outputs support 0 to 10 V, 1 V to 5 V, and -10 V to +10 V; current outputs support 0 to 20 mA, 4 mA to 20 mA, and -20 mA to +20 mA.
Technical Summary
| Product type designation | AQ 4xU/I |
|---|---|
| Degree of protection | IP65/67 |
| Number of analog outputs | 4 |
| Connection | 4xM12 |
| Load voltage 1L+ rated value (DC) | 24 V |
| Load voltage 1L+ permissible range, lower limit (DC) | 20.4 V |
| Load voltage 1L+ permissible range, upper limit (DC) | 28.8 V |
| Output current, nominal | Total current 1 A up to 45 °C; 0.5 A up to 55 °C |
| Cycle time (all channels) max. | 1 ms |
| Firmware version | V2.0.x |
| STEP 7 TIA Portal configurable/integrated from version | STEP 7 V14 or higher |
| PROFINET from GSD version/GSD revision | GSDML V2.3.1 |
Applications
- Analog signal output: Outputs voltage or current analog signals through 4 channels.
- Actuator connection: Provides actuator connections with two-wire or four-wire wiring for voltage and current outputs.
Frequently Asked Questions
What is Siemens 6ES7145-5ND00-0BA0?
It is a SIMATIC ET 200AL AQ 4xU/I analog output module with 4xM12 and IP67 degree of protection.
How many analog outputs does 6ES7145-5ND00-0BA0 have?
It has 4 analog outputs.
What output ranges are supported by the AQ 4xU/I module?
Supported voltage output ranges are 0 to 10 V, 1 V to 5 V, and -10 V to +10 V. Supported current output ranges are 0 to 20 mA, 4 mA to 20 mA, and -20 mA to +20 mA.
What is the load voltage for 6ES7145-5ND00-0BA0?
The rated load voltage 1L+ is 24 V DC, with a permissible range from 20.4 V DC to 28.8 V DC.
Which engineering versions support this module?
STEP 7 TIA Portal supports it from STEP 7 V14 or higher, and STEP 7 supports it from V5.5 SP4 Hotfix 7 or higher.
