Key Features
- Product type designation: IM 153-1 DP ST
- Based on: 6ES7153-1AA03-0XB0
- Interface: RS 485
- Bus protocol: PROFIBUS DP to EN 50170
- Hardware configuration: number of modules per DP device interface, max. 8
- Supply voltage: Rated value (DC) 24 V
Technical Summary
| Product type designation | IM 153-1 DP ST |
|---|---|
| based on | 6ES7153-1AA03-0XB0 |
| Supply voltage, rated value (DC) | 24 V |
| Supply voltage, permissible range, lower limit (DC) | 20.4 V |
| Supply voltage, permissible range, upper limit (DC) | 28.8 V |
| Input current, max. | 350 mA; At 24 V DC |
| Output voltage, rated value (DC) | 5 V |
| Output current for backplane bus (5 V DC), max. | 1 A |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| Design of the connection | 9-pin sub D socket |
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
Applications
- ET 200M to PROFIBUS DP communication: Interface for connecting an ET 200M station to a PROFIBUS DP network.
- Module expansion on a DP device interface: Supports operation with up to 8 modules per DP device interface.
Frequently Asked Questions
What is the exact Siemens model of this ET 200M interface module?
The exact model is 6AG1153-1AA03-2XB0, with product type designation IM 153-1 DP ST.
What supply voltage does 6AG1153-1AA03-2XB0 use?
Rated value (DC) 24 V, with a permissible range of 20.4 V to 28.8 V.
Which interface and protocol are used on this module?
It uses RS 485 and PROFIBUS DP to EN 50170.
What connection and module capacity should be checked before ordering?
The connection is a 9-pin sub D socket, and the DP device interface supports a maximum of 8 modules.
